APPLICATION:

Air-cooled Weather Conditions Meter. To determine the color fastness and aging to sunlight, weather resistance, compound color fastness to sunlight-perspiration of colored textile, leather, leatheroid, plastic, etc, by setting various parameters of irradiance, temperature, humidity, spray to simulate natural condition in lab. Be able to control irradiance real-time, automatically inspect and compensate irradiance, temperature, humidity.

RELATED STANDARDS:

STANDARDS

ISO 105-B02/B04/B06,

AATCC TM16

JIS L0843

     Note: this tester can conform to but not limit to all the standards above, for more standards conformance, please contact us.

FEATURES:

●     Presetting various specifications, meet diverse range of standards, including AATCC, ISO, etc.

●     Light source: 3000 watt air cooled xenon arc lamp;

●     Automatic compensating system (PATENT) adjusts the Xenon Lamp Power;

●     Blue LCD Panel, the operator simply selects the required test module and test standard; ease to use;

●     Irradiation control, light irradiance sensor monitor, digital setting, automatic compensating system, stepless adjustable.

●     Manageable size is most appropriate to testing fabric samples, and easy access to sample holder;

●     Chamber temperature control, irradiation temperature, heater raise the temperature;

●     Ultrasonic humidification system makes spray water even and low noise. Industrial refrigerating machine dehumidifying, and close loop control the humidity;

KEY SPECIFICATION:

●     Power supply                                 Ac220V±5% 50Hz 20A 4500W

●     Irradiation Source:                          3000W Air-cooled Long Xenon Arc Lamp

●     Average Lamp Life:                         1000 hours

●     Rack Rotating Speed:                      5r/min

●     Diameter of Sample Rack                350mm

●     Specimen Holder Exposure Area:     100×45mm(ISO) 140×70mm(AATCC)

●     Max Exposure Area of Specimen      450

●     BST                                               30℃~110℃±1℃

●     BPT                                               30℃~100℃±2℃

●     Chamber Temperature                      25℃~50℃±2℃

●     Cooler Power and Cooling Capacity   1000W, 2400cal/hour

●     Humidity Range                               15％RH~95％RH ±5%

●     Irradiance range

         Wide Bandwidth Measurement:    (35～100)±1W/m2 @300～400nm

         Narrow Bandwidth Measurement:  (0.550～1.300)±0.02W/m2 @420nm

●     Instrument Size                               850×620×1750mm(L×W×H)

●     Instrument Weight                           200kg

ENVIRONMENTAL REQUIREMENTS (AMBIENT):

     Temperature Range:                        16-29℃ (60- 85℉)

     Humidity Range:                              0-85% RH, non-condensing.

     Altitude:                                          Up to 2000 meters (6560 feet)

     Storage:                                          10-43℃ (50-110℉), 20-80% RH

     Installation Category:                        II

     Pollution Degree:                              2

     The room should be ventilated properly with minimal drafts, air pollution, or dust. Do not install the instrument in a corrosion testing environment, or adjacent to corrosion testing equipment it is not advisable to install the instrument in such locations as a warehouse, boiler room, garage/factory are, paint room, or where doors to the outside environment are frequently opened causing changes in room temperature and humidity. Such locations may adversely affect instrument operation, longevity and test integrity (repeatability).

RELATED KEY WORDS:

colorfastness to hot pressing heating,colorfastness to perspiration,colorfastness to rubbing,colorfastness to washing,Colorfastness/rubbing Gakushin tester,Colour & Light Fastness,colour assessment,colour assessment cabinet,colour evaluation,colour fast,colour fastness,colour fastness testing,colour fastness to hot pressing heating,colour fastness to perspiration,colour fastness to rubbing